BJCZC - TONER FOR LASER PRINTERS (UNISYS MODEL 37)
- MSDS: BJCZC
- Manufacturer: KYOCERA CORP (MIE TAMSKI FACTORY)
- Product Name: TONER FOR LASER PRINTERS (UNISYS MODEL 37)
- National Stock Number: 6850-01-296-3595
Product Identification
Product ID:TONER FOR LASER PRINTERS (UNISYS MODEL 37)
MSDS Date:11/21/1989
FSC:6850
NIIN:01-296-3595
Kit Part:Y
MSDS Number: BJCZC
Responsible Party
WATARA-GUN MIE-PREF. 519-04 (JAPAN)
JA
Emergency Phone: JAPAN 0596-58-4114
Info Phone: JAPAN 0596-58-4114
Cage: 59096
Contractor
Telephone: 716-292-0880
Cage: 2J705
Ingredients
STYRENE/N-BUTYL ACRYLATE COPOLYMER
CAS: 25213-39-2
MAGNETITE (FE3O4)
POLYPROPYLENE
FREE SILICA
OSHA PEL 0.05 MG/M3
ACGIH TLV: 0.3 MG/M3 TOTAL DUST
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: NON-IRRITATING AND NON-TOXIC.
EYE: DUST OF THE PRODUCT MAY CAUSE EYE IRRITATION. INHALE: DUST OF
THE PRODUCT MAY CAUSE LUNG IRRITATION.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:NONE
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. INHALE: REMOVE FROM EXPOSURE.
EYE: IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES. INGEST: CONSULT A
PHYSICIAN.
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN WITH VACUUM CLEANER.
Neutralizing Agent:NONE APPLICABLE FOR THIS MATERIAL
Handling
Handling and Storage Precautions:KEEP IN CLOSED PACKAGE.
Exposure Controls
Respiratory Protection:NONE WHEN USED AS INTENDED.
Ventilation:LOCAL- PREFERABLE, MECHANICAL- ACCEPTABLE.
Protective Gloves:NORMALLY NOT REQUIRED.
Eye Protection:NONE WHEN USED AS INTENDED.
Other Protective Equipment:NONE WHEN USED AS INTENDED.
Work Hygienic Practices:WASH THROUGHLY AFTER HANDLING AND BEFORE
EATING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:284F,140C
Spec Gravity:1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF LIQUID AND ABSORBANT AT AN APPROVED
DISPOSAL SITE OR FACILITY. ENSURE CONFORMITY WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.